Trilithic

Seeker BB-2

Automated Leakage Detection System

Seeker BB-2

Includes the following:

  • Seeker BB-2
  • Remote WiFi Antenna with 12’ Coaxial Cable and Magnetic Mount
  • DC Power Cable
  • Two USB Flash Drives
  • Operation Manual and Device Drivers on CD
  • Printed Installation Guide & Installation Checklist
  • Mounting Hardware

Seeker BB-2 is an automated GPS-based Cable TV leak detection system that operates in the background while techs drive their routes, without any operator interaction.

  • Totally automatic operation – no operator interaction – for maximum efficiency
  • Ideal for drive-outs, leak documentation and troubleshooting
  • All vehicle electronics housed in tough aluminum enclosure
  • Leakage record upload via WiFi or Internet to LAW central server application
  • Very cost-effective

Leakage detection that’s automatic, invisible and hands-free.

Improve the efficiency of your leakage detection operations by eliminating operator interaction.

The cost-effective leakage detection solution for every truck.

Trilithic’s new Seeker BB-2 automatic leakage detection system is a fully automated, GPS-based leakage detection system that operates in the background while techs drive their routes, without any operator interaction. You can just install it and forget it.

Housed in a heavy-gauge sheet aluminum enclosure, the Seeker BB-2 can be tucked away into any convenient location in the vehicle – such as under a seat or behind the driver. The system uses a monopole antenna to monitor leaks wherever a vehicle goes, then stores the data and uploads it automatically to Trilithic’s LAW (Leakage Analysis Workshop) server via a built-in WiFi adaptor when the vehicle is near a designated WiFi “hot spot.”

Using the Seeker BB-2, every truck in the operator's fleet contributes useful leakage data, eliminating the need for special drive-out vehicles and personnel. At the end of the workday, the LAW server software analyzes and processes the data from the entire fleet, using a sophisticated algorithm to calculate the location of each leak to within feet of its source.

Completely automatic, hands-free leak recording

While the tech is driving to a location or to work, the Seeker BB-2 automatically monitors leakage strength every second the vehicle is in motion, labeling each measurement with time and date and the leak's GPS location. The driver doesn’t need to adjust the unit for different distances from a distribution line, or interact with it in any way. Distance corrections are all handled automatically when the data is processed, rather than by distracting the tech while driving or at work.

Convenient uploading

Normally, the measurement data for a day (or a week) is uploaded to the LAW server using the Seeker BB-2’s built-in WiFi adapter. The upload process occurs automatically whenever the unit detects the availability of a designated hot spot (typically the vehicle’s parking lot). Records may also be downloaded to an ordinary USB memory stick, and then uploaded to the LAW server through any USB-equipped PC with an Internet connection.

Seamless analysis applications

The LAW server processes all of the collected leakage records, typically every day, analyzing the thousands of measurements that were taken “in the street” to determine the true location of each leak source. It then corrects the measured strength of each leak for distance and generates the alerts, reports and leakage logs the operator needs to manage the leakage control program, even prioritizing the outbreaks to simplify the process.

Specifications

Frequency Range Low Band: 109.25 to 110.5 MHz
High Band: 118.5 to 147.25 MHz
Settable using the Seeker Setup software, in 6.25 KHz steps
Frequency Presets Up to 10 selectable operating frequencies. Selections are loaded into the detector using Seeker Setup software
Level Range 2 to 2000 µV/m
Channel Tag Range 10 Hz to 23 Hz (Excluding 16 Hz)
Dimensions 11 x 8 x 2.15 inches (279.4 x 203.2 x 54.61 mm)
Weight 3.10 lbs (1406.13 g)

Accessories

  • Garmin GPS Receiver

    Product Image

    Garmin GPS Receiver. RS-232 Interface.

  • Seeker Approved A/B/G WiFi Access Point

    Product Image

    Commercial-grade WiFi access point that ensures optimum data upload range and connection reliability.

  • APM-2 Antenna

    Product Image

    Permanent mount, vertical quarter wave whip antenna. Specify single frequency from 108 to 118 MHz.

  • APM-3 Antenna

    Product Image

    Permanent mount, vertical quarter wave whip antenna. Specify single frequency from 119 to 160 MHz.

  • AVM-2 Antenna

    Product Image

    Magnetic base, vertical quarter wave whip antenna. Specify single frequency from 108 to 118 MHz.

  • AVM-3 Antenna

    Product Image

    Magnetic base, vertical quarter wave whip antenna. Specify single frequency from 109.27 - 110.5 MHz and 118.25 - 147.25 MHz.

Replacement Parts

  • Power Cable for the Seeker Mobile Mount and Seeker BB-2

    Product Image

    DC power cable for the Seeker Mobile Mount (SMB-2) and Seeker BB-2.

  • USB Charge/Data Cable for Seeker, Seeker MCA, and Seeker BB-2 (I/O-20)

    Product Image

    Mini USB charge/data cable for the Seeker, Seeker MCA, and Seeker BB-2.

  • Remote WiFi Antenna

    Product Image

    Replacement WiFi antenna for WiFi-equipped Seeker GPS MCA Modules (P/N 2011029001 and P/N 2011029005) and Seeker BB-2. Includes 12’ coaxial cable for remote mounting.

Software

  • Seeker Setup Software

    Product Image

    Configures the Seeker and Seeker Lite² Leakage Detectors, enabling operator to assemble files containing Channel Frequencies, Squelch Levels, Audio Volume and other settings. The operator can efficiently download configurations to one or more leakage detectors. The software includes the Seeker & Seeker MCA Mini USB Charge/Data Cable (I/O-20) and Seeker Lite² Data Cable (I/O-17). Includes capability to assemble Seeker GPS leakage data files in a format compatible with the CLT APLAS3i service and to forward the records to the APLAS3i server for analysis and work order generation.

  • Map Subscription for LAW Server Software (Yearly Fee)

    Product Image

    This is a one year subscription and/or license renewal for the LAW Map License. The subscription provides four automatic map updates per year and is necessary for the operation of the LAW Server Software. 

    The LAW Map License must be purchased with new copies of the LAW Server Software at the time of initial sale and must be renewed yearly.  This LAW Map License can also be purchased as a yearly renewal license to an existing LAW Server.

Related Items

  • LAW Integrated Server Package - Supports Up to 250 Devices (Expandable to 1000 Devices)

    Product Image

    Pre-configured server*, integrating powerful software and hardware to provide a tailored, comprehensive solution for managing the storage and retrieval of leakage information collected by vehiclemounted Seeker GPS systems. Receives data uploads via the Internet through an application running on the technician’s PC or laptop (no charge) or through a configured WiFi wireless site. Data stored in the LAW Server Software is displayed on maps and as text. Work orders can be created and emailed to an assigned technician.

    The LAW Integrated Server Package provides the following features and benefits;

    • Used for small to large deployments of Seeker, Seeker MCA or Seeker BB-2 Units.
    • Each Seeker, Seeker MCA or Seeker BB-2 that uploads data to LAW is considered to be one device.
    • Basic configuration supports up to 250 devices.
    • Can be licensed for up to 1,000 devices.
    • Additional expansion licenses, beyond the initial 250 licenses can be purchased at the time of sale or aftermarket.
    • Expansion licenses do not need to be renewed yearly.

    Comes pre-configured with LAW Server Software and other required Server Licenses. The Map Subscription for LAW Server Software must be purchased at the time of initial sale. This license provides the user four automatic map updates per year and must be renewed yearly.

    * Specially configured Dell 2U rack mounted Server includes OEM Next Business Day Parts and Labor On-Site Response Warranty – 3 years from DELL®. Compatible with standard PS/2 keyboard and mouse. A second power supply is available from Dell to provide redundancy and extra reliability. A backup storage system is recommended for prevention of data loss.

  • LAW Integrated Server Package - Seeker Expansion License (Additional 25 Devices)

    Product Image

    This is a hardware expansion license for the LAW Integrated Server Package beyond the initial 250 licenses that are included at the time of initial purchase. This package includes licenses for an additional 25 Seeker, Seeker MCA or Seeker BB-2 Units.  Each Seeker, Seeker MCA or Seeker BB-2 that uploads data to LAW is considered to be one device.

    The hardware expansion license can be purchased with the LAW Integrated Server Package at the time of sale or aftermarket.

  • LAW Hosted Service Subscription (Monthly Fee)

    Product Image

    Offered as an alternative to installing and maintaining expensive server equipment and relying on IT personnel focused on other tasks, Trilithic's Network Services group hosts all of the required hardware, software, security and support, allowing you to build and operate a high-quality broadband network at a lower total cost.

    QUANTITY DISCOUNTING AVAILABLE for monthly rates based on the number of Seekers in your system, contact Trilithic Sales for more information.

    For new purchases, you must include LAW Hosted Services Setup & LAW Map License. 

  • LAW Hosted Services Setup (One-Time Fee)

    Product Image

    This is a one-time set up fee for LAW Hosted Services.  This does not include the LAW Map License or Monthly Subscription.

  • Seeker

    Product Image

    This is a frequency agile leakage detector (109.25 - 110.5 MHz and 118.5 - 147.25 MHz) with ten user selectable presets. The instrument’s features include Searcher Plus GT technology that is compatible with CT-2 or CT-3 channel tagging techniques, measurement range from 2 - 2000 μV/m, numeric readout, and tone proportional to signal strength.

    Includes the Following:

    • Leakage Detector
    • Seeker Rubber Duck Antenna (DOES NOT require external monopole or dipole antenna)
    • Charger
    • Mini USB Charge/Data Cable (I/O-20)
    • Mobile Mount (SMB-2)
    • Mobile Mount Power Cable
    • Software Drivers and Operation Manual on CD

    REQUIRES SEEKER SETUP SOFTWARE FOR ADVANCED CONFIGURATION.

  • MCA Module with Hardwired Serial Data Connection

    Product Image

    MCA Module with Hardwired Serial Data Connection to GPS receiver.

  • MCA Module with Hardwired Serial Data Connection and WiFi Option

    Product Image

    MCA Module with Hardwired Serial Data Connection to GPS receiver and WiFi Option to allow direct upload of leakage data from your vehicle to the LAW software through a properly configured wireless site, see the Seeker Approved A/B/G WiFi Access Point below. Includes WiFi antenna with 12’ coaxial cable for remote mounting.

  • CT-2

    Product Image

    Hides a distinctive marker signal in the system video carrier used for leakage testing, making it easy to identify the source of signal leakage in “overbuilt” areas.

    The CT-2 comes with standard tagging frequencies of 3 Hz and 20 Hz.  The 20 Hz tagging frequency is adjustable between 10 Hz and 23 Hz.  When ordering, specify your desired tagging frequency. Only one CT-2 is needed per head-end.

     

  • CT-2 (CE Approved)

    Product Image

    This CE Approved version of the CT-2 hides a distinctive marker signal in the system video carrier used for leakage testing, making it easy to identify the source of signal leakage in “overbuilt” areas.

    The CT-2 comes with standard tagging frequencies of 3 Hz and 20 Hz.  The 20 Hz tagging frequency is adjustable between 10 Hz and 23 Hz.  When ordering, specify your desired tagging frequency. Only one CT-2 is needed per head-end.

  • CT-3

    Product Image

    Provides a narrow band, AM modulated carrier that is “tagged” for leakage testing, making it easy to identify the source of signal leakage in “overbuilt” areas.

    When ordering, specify the AM modulated carrier frequency from 108 Mhz to 157 MHz. The CT-3 comes with standard tagging frequencies of 3 Hz and 20 Hz.  The 20 Hz tagging frequency is adjustable between 10 Hz and 23 Hz.  When ordering, specify your desired tagging frequency. Only one CT-3 is needed per head-end.

  • CT-3 (CE Approved)

    Product Image

    This CE Approved version of the CT-3 provides a narrow band, AM modulated carrier that is “tagged” for leakage testing, making it easy to identify the source of signal leakage in “overbuilt” areas.

    When ordering, specify the AM modulated carrier frequency from 108 Mhz to 157 MHz. The CT-3 comes with standard tagging frequencies of 3 Hz and 20 Hz.  The 20 Hz tagging frequency is adjustable between 10 Hz and 23 Hz.  When ordering, specify your desired tagging frequency. Only one CT-3 is needed per head-end.

Firmware

 

Get Updates in your Inbox

Enter your email address to receive alerts when new firmware or application notes are released for the Seeker family.

Posted March 2009

Listed below is the most recent update available for the Seeker BB-2 Firmware. For assistance with any installation, please call tech support at 1-800-344-2412.

Trilithic encourages maintaining up-to-date firmware; however, your company may have policies in place to manage the update process.

This firmware update requires Seeker Setup Software Version 3.25 to configure your Seeker BB-2. If you own an earlier version of the Seeker Setup Software, please contact Trilithic Applications Engineering Support to obtain a free software update.

WARNING! This firmware is appropriate for most users, but some MSO’s do have different update policies in place. As such, in some cases the standard firmware may render certain test functions inoperable. Please contact your manager before updating your firmware.

Download Now

Please review the updated enhancements below BEFORE installing your Seeker update.

V02.02

  • Enhanced temperature compensation

Seeker BB-2 Firmware Update History

Warranty

Repairs

All repairs carry a 90-day warranty against defects in replacement parts and repair workmanship.

Products

All Trilithic products are warranted against defects in materials or workmanship for a minimum of one year after shipment.

Trilithic's obligation under this warranty is limited to the repair or replacement of the product after being returned to our factory, and Trilithic determining the product be indeed defective.

This is Trilithic's sole warranty and is given in lieu of all other warranties, expressed or implied, including warranties of merchantability or fitness for a particular purpose and sets forth the buyers sole remedy.

The following products carry a Manufacturers One Year Warranty

8821Q, 8821Q-R & 8853Q Rotary & Benchtop Attenuators TFS-3200 Series
APSS-1B TFS-201 TFS-FS1
DCVF-5 TFS-290 Series TFS-FS1K500 Series
Impedance Matching Pads TFS-301 TLB-60
I-Stop TFS-401 Tunable Filters
Programmable RF Switches TFS-2000 Series VF-4 & VF-5

The following products carry a Manufacturers Two Year Warranty

860 DSP & 860 DSPi 9581 SST R3 & 9581 SST R4 RSVP²
860 DSPh & Input Expander 9581 TPX Seeker Lite²
860 DSPr CT-2/ CT-3 Seeker
8300 FST Model Two Seeker MCA
8310 RSA Model Three Seeker BB-2

The following products carry a Dell Three Year Warranty

All Specially Configured Dell PowerEdge 2U Rack Mount Server products are warranted against defects in materials or workmanship for a minimum of three years after shipment. Dell provides next business day, parts and labor, on-site response for the following Trilithic products.

ADIA Integrated Server Package LAW Server Package
Guardian II Integrated Server Package Trilithic Data Manager (TDM) Integrated Server Package

 

Think Ahead.
Copyright © 2010 Trilithic, Inc. All Rights Reserved
Execution time: 0.48 seconds
Close

Translate Page

  • To translate page from English to another language, select a language from the drop-down list.
  • To return the page to English, click the Show Original button in the Google Translate bar at the top of the page.
  • To close Google Translate, click the X in the Google Translate bar at the top of the page. This also changes the page back to English.
  • To close this dialogue, click the Close button.
Notice: Translations are approximate.
Close

Session Alert

Notice: Your session is about to expire. If you would like to continue, please click the Continue button. Otherwise you will be logged out and must log back in to return to the current page.

Sign In

My email address is *
* You may also enter your Trilithic screen name.